煤矿3.0Mta新井设计.docx
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 煤矿 3.0 Mta 设计
- 资源描述:
-
1、摘 要本设计包括三个部分:一般部分、专题部分和翻译部分。一般部分为祁煤矿3.0 Mt/a新井设计。一般部分共包括10章:1.矿区概况与井田地质特征;2.井田境界和储量;3.矿井工作制度和设计生产能力及服务年限;4.井田开拓;5.准备方式采区巷道布置;6.采煤方法;7.井下运输;8.矿井提升;9.矿井通风及安全;10. 矿井基本技术经济指标。祁东煤矿位于安徽省宿州市东南,京沪铁路西侧,井田中心距宿州市约20km,交通便利。井田形状近似长方形,东西长约9 km,南北宽约3.0 km,面积约24 km2。井田内开采61煤层和71煤层,先采61,做为解放层开采,后开采71煤。煤层倾角1215,平均12
2、、3。煤层平均厚度61煤层7.5 m,71煤7.0 m。井田地质条件较为简单。矿井工业储量为330.2297Mt,可采储量为220.6853Mt。矿井设计生产能力为3.0Mt/a。矿井服务年限61.3 a。矿井涌水量不大,正常涌水量为436m3/h,最大涌水量为586 m3/h。61煤相对瓦斯涌出量为10 m3/t,属高瓦斯煤层。矿井煤尘无爆炸危险性,煤层不易自燃,自然发火等级为级。矿井采用暗斜井两水平开拓,下行开采。一矿一面,采煤方法为综合机械化放顶煤开采。全矿采用胶带运输机运煤,辅助运输前期采用1.5 t固定箱矿车,后期采用齿轨车运输。矿井通风方式前后期均为为采区式通风。矿井年工作日为33
3、0 d,日净提升时间16 h,工作制度为“四六制”。专题部分题目是煤炭地下气化开采技术基础研究。以一些煤矿工程实例为例,通过建立模型进行分析计算,研究了煤炭地下气化过程中顶板岩层移动特征、煤炭地下气化过程中半焦孔隙结构的变化规律以及煤炭地下气化过程中覆岩应力场的数值,得出关于以上三方面的相关结论。翻译部分是一篇关于煤层气恢复技术的论文,英文题目为Simulation of CO2-geosequestration enhanced coal bed methane recovery with a deformation-flow coupled model关键词:新井设计;综合机械化放顶煤开采
4、;采区式通风;立井开拓;采区ABSTRACTThis design includes three parts: the general part, special subject part and translation part.The general part is a new design of Qidong mine. This design includes ten chapters: 1.An outline of the mine field geology; 2.Boundary and the reserves of mine; 3.The service life and
5、working system of mine; 4.Development engineering of coalfield; 5.The layout of mining area; 6.The method used in coal mining; 7. Transportation of the underground; 8.The lifting of the mine; 9. The ventilation and the safety operation of the mine; 10.The basic economic and technical norms.The Qidon
6、g mine locates at the crosspart of Qixian, Xisipo and Guzhen of Suzhou in Anhui province, 20 km away from the center of the town. And the transportation is very convenience. The shape of minefield is like a rectangle which has a length of 9 km in the east and west and a width of 3 km in the south an
7、d north on average. The total plane area of the mine is about 24 km2. There are two coal seams in the mine NO.61 and NO. 71. Mining the NO.61 coal seam firstly.The angle is about 9.0513.8 degree with an average of 12 and the thickness of both coal seams is about 7.0 m. The minefield geological condi
8、tion is simple.The proved reserves of the minefield are 330.2297 million tons. The recoverable reserves are 220.6853 million tons. The designed productive capacity is 3.0 million tons per year. The service life is 61.3 years. The normal water flow of the mine is 437 m3 per hour and the max water flo
展开阅读全文
图海文库所有资源均是用户自行上传分享,仅供网友学习交流,未经上传用户书面授权,请勿作他用。


阿司匹林片剂洁净区平面布局图CAD图纸.dwg
40×40矩形垫片零件的冲压复合模具设计【冲孔落料复合模】.zip

