南京某中型办公楼空调系统工艺设计.doc

1、 - 摘要南京某中型办公建筑面积3610 m2，建筑物高度23m，地上主体建筑六层，框框架结构，室内外高差0.8m。空调建筑为一小型建筑，选用多联机VRV3空调系统；它集变频、变容等技术于一身，具有使用节能、舒适、控制、灵活等特点，通过包不同容量机组的组合和布置可以满足不同规模建筑物的要求，特别是在小于10000平米的舒适性空调系统内。VRV空调系统全称为Variable Refrigerant Volume系统，即变制冷剂流量系统。系统结构上类似于分体式空调机组，采用一台室外机对应一组室内机（一般可达16台）。控制技术上采用变频控制方式，按室内机开启的数量控制室外机内的涡旋式压缩机转速，进行

2、制冷剂流量的控制。 VRV空调系统与全空气系统，全水系统、空气水系统相比，更能满足用户个性化的使用要求，设备占用的建筑空间比较小，而且更节能。该系统采用网络控制，变频多联机运行状态可以通过LONWORKS或BACnet网关接口上传信号至建筑物自控中心BAS或BMS系统，自控中心经该网关口下传信号至变频多联机设备，从而实现对整个空调系统的管理。网络控制的功能：室温监视、运行状态监视、压缩机运行状态监视、室内风扇运行状态、空调报警信息和错误代码、ON/OFF控制和监视、温度设定和监视、空调机模式设定和监视、遥控器模式设定和监视、滤网信号监视和复位、风向设定和监视、遥控器禁止设定。关键词：VRV、变

3、频控制、冷负荷Abstract Nanjing, a medium-sized office building area of 3610 m2, the building height of 23m, six-floor main building, box frame construction, interior height 0.8m. Air-conditioned building is a small building, the choice of multi-line VRV3 air conditioning system; it set frequency, modulatio

4、n and other technologies in one, with the use of energy efficiency, comfort, control, flexibility and so on, through a combination of packages of different size and layout of units to meet the different the scale of the building requirements, especially in the less than 10,000 square meters of comfo

5、rt air conditioning system. VRV air conditioning system called Variable Refrigerant Volume whole system, namely the variable refrigerant flow system. Structure similar to the split system air conditioning units, using a single outdoor unit corresponds to a set of indoor unit (usually up to 16). Cont

6、rol technology, variable frequency control method, according to the number of indoor unit is turned on inside the outdoor unit control the scroll compressor speed, the refrigerant flow control. VRV air conditioning systems and all air system, all water systems, air - water systems, to better meet th

7、e use requirements of individual users, equipment, building space occupied by relatively small, and more energy efficient. This systemuses network control, frequency multi-line running through the BACnet Gateway Interface LONWORKS or upload signals to the center of the building automation system BAS

8、 or BMS, control center via the gateway port to download multi-line signal to the inverter device, enabling the the management of the entire air conditioning system. Network control functions: temperature monitoring, operation status monitoring, status monitoring operation of the compressor, indoor

9、fan running, air conditioning, alarm information and error codes, ON / OFF control and monitoring, temperature setting and monitoring, air conditioning mode setting and monitoring , remote control mode setting and monitoring, surveillance and reset the filter signals, wind direction setting and moni

10、toring, remote control prohibition setting. Keywords: VRV, frequency control, cooling load目录第一章 绪论41.1 设计目的41.2 设计概述-41.3 设计任务-51.4 设计内容-5第二章 设计依据-52.1 气象资料-52.2 室内设计参数-62.3 土建资料-6 2.3.1 建筑信息-7 2.3.2 建筑结构-7第三章 空调系统冷负荷计算-73.1 外围护结构冷负荷-73.1.1 外墙冷负荷-73.1.2 外墙及屋面冷负荷-83.2 人员冷负荷-9 3.2.1 潜热冷负荷-9 3.2.2 显热冷负

11、荷-103.3 设备冷负荷-103.4 冷负荷计算汇总-103.5 新风量的冷负荷-113.6 空调湿负荷-123.7 各层空调冷负荷汇总-123.8 空调总冷负荷汇总-133.9建筑空调总冷负荷-143.10空调房间的湿负荷-14第四章 空调系统方案的确定-164.1 系统方案的比较-164.2 系统方案的确定-204.3 系统的焓湿图-21第五章 空调风系统-225.1 空调系统的风道-225.2 风道的水力计算-22 5.2.1 水力计算的类型-22 5.2.2 水力计算的方法与原理-23 5.2.3 新风机组的选型-235.3 风口及其气流组织-25 5.3.1 气流组织方式-25 5.3.2 气流组织计算-25第六章 空调冷热源的选择-