欢迎来到图海文库! | 帮助中心 分享价值,成长自我!
图海文库
全部分类
  • 机械模具>
  • 机电控制>
  • 工艺夹具>
  • 车辆工程>
  • 化工环保>
  • 土木建筑>
  • 采矿通风>
  • CAD图纸>
  • 三维模型>
  • 数控编程>
  • 文档资料>
  • ImageVerifierCode 换一换
    首页 图海文库 > 资源分类 > DOC文档下载
    分享到微信 分享到微博 分享到QQ空间

    古交市排水工程设计.doc

    • 资源ID:16237       资源大小:2.01MB        全文页数:97页
    • 资源格式: DOC        下载积分:10金币
    微信登录下载
    验证码下载 游客一键下载
    账号登录下载
    三方登录下载: QQ登录
    二维码
    微信扫一扫登录
    下载资源需要10金币
    邮箱地址:
    验证码: 获取验证码
    温馨提示:
    支付成功后,系统会自动生成账号(用户名为邮箱地址,密码是验证码),方便下次登录下载和查询订单;
    支付方式: 支付宝    微信支付   
    验证码:   换一换

     
    账号:
    密码:
    验证码:   换一换
      忘记密码?
        
    友情提示
    2、PDF文件下载后,可能会被浏览器默认打开,此种情况可以点击浏览器菜单,保存网页到桌面,就可以正常下载了。
    3、本站不支持迅雷下载,请使用电脑自带的IE浏览器,或者360浏览器、谷歌浏览器下载即可。
    4、本站资源下载后的文档和图纸-无水印,预览文档经过压缩,下载后原文更清晰。
    5、试题试卷类文档,如果标题没有明确说明有答案则都视为没有答案,请知晓。

    古交市排水工程设计.doc

    1、图书分类号:密 级:毕业设计(论文)半岛蓝湾大酒店给水排水工程设计THE DESIGN OF BUILDING WATER AND WASTEWATER ENGINEERING FOR THE PENINSULA ISLAND RESORT HOTEL 学生姓名学院名称专业名称指导教师20xx年月日xxx学院学位论文原创性声明本人郑重声明: 所呈交的学位论文,是本人在导师的指导下,独立进行研究工作所取得的成果。除文中已经注明引用或参考的内容外,本论文不含任何其他个人或集体已经发表或撰写过的作品或成果。对本文的研究做出重要贡献的个人和集体,均已在文中以明确方式标注。本人完全意识到本声明的法律结果

    2、由本人承担。论文作者签名: 日期: 年 月 日xxx学院学位论文版权协议书本人完全了解徐州工程学院关于收集、保存、使用学位论文的规定,即:本校学生在学习期间所完成的学位论文的知识产权归徐州工程学院所拥有。徐州工程学院有权保留并向国家有关部门或机构送交学位论文的纸本复印件和电子文档拷贝,允许论文被查阅和借阅。徐州工程学院可以公布学位论文的全部或部分内容,可以将本学位论文的全部或部分内容提交至各类数据库进行发布和检索,可以采用影印、缩印或扫描等复制手段保存和汇编本学位论文。论文作者签名: 导师签名: 日期: 年 月 日 日期: 年 月 日摘 要本设计是古交市的城市排水工程。该污水处理厂工程,总规模

    3、达到约6万吨/日。本设计处理的对象为城市污水,主要污染物质为悬浮固体(SS)及溶解和胶体状态的有机污染物(BOD)等。根据城市所处的地理位置和污水厂的规模,并结合考虑需脱氮除磷的要求,城市污水处理厂设计采用A2/O工艺。该工艺污水处理流程为:从中格栅到泵房,进入细格栅,沉砂池,初沉池,A2/O反应池,二沉池,普通快滤池,消毒池,巴氏计量槽,出水排放。污泥处理流程为:从二沉池和初沉池排除的剩余污泥首先进入污泥提升泵房,进入污泥浓缩池,贮泥池,污泥消化池,污泥脱水间,泥饼外运。通过此工艺的处理,出水水质将达到城镇污水处理厂污染物排放标准(GB18918-2002)一级A标准。中格栅栅槽宽2.2m,

    4、过栅水头损失0.1m,总高度为1.15m,总长度为3.55m;污水泵房采用自灌式半地下式矩形泵房,选用300QW95024110型潜污泵,其流量为950m3/h,扬程为24m,转速为900r/min,电机功率为110kW,效率为81.9%;细格栅栅槽宽1.69m,过栅水头损失0.13m,总高度为1.18m,总长度为2.5m;沉砂池采用平流式,共1座,长度为22.5m,总宽3m,有效水深1.02m,沉泥区高度为1.68m,沉砂池总高3m,进水渐宽部分长度为2.75m,出水渐窄部分长度为2.75m,进水管径为DN900mm,出水采用薄壁出水堰跌落出水,堰上水头为0.27m;初沉池和二沉池均采用辐流

    5、式沉淀池,各设2座,沉淀池直径为33m,沉淀部分水深3m,沉淀池总高度7.735m;A2/O池设4座,有效水深3m,池长30m,厌、缺氧池宽2.7m,好氧池采用3廊道式推流式反应池,廊道宽3m。污泥浓缩池采用1座矩形气浮浓缩池,尺寸为618m,总高度为1.7m;贮泥池设计1座,有效深度3m,污泥斗高度4.6m,总高7.9m;污泥消化池设计一级消化和二级消化,一级消化池采用3座,二级消化池采用2座;污泥脱水采用带宽2m的DY型带式压滤机,2用1备。普通快滤池采用8个,双排布置,尺寸为154m,总高位3.7m;消毒接触池2座,采用2个廊道推流式接触反应池,有效水深4m,长20m,宽8m,高4.7m

    6、;计量设施为巴氏计量槽2座,长12.465m,喉宽0.75m;中水泵站采用2台250S65A型单级双吸离心泵1用1备。通过设计研究,可以确定一套技术可行,经济合理的方案。改善当地生态环境,提高人民生活质量和城市形象。该工程的建成与投产能够有效解决该市排水系统与污水处理的问题,保证社会经济的可持续发展。关键词 A2/O;脱氮除磷;城市排水管网;城市污水处理厂IVAbstractThis design is the area of urban drainage project of GuJiao. The sewage treatment plant engineering, total dime

    7、nsions to about 6 million tons/day. The object of this design for urban sewage treatment, the main pollutants for suspended solids (SS) and dissolved and colloid state of organic pollutants (BOD), etc.According to city location and the size of the wastewater treatment plant, and combined with consid

    8、eration to nitrogen phosphorus requirement, municipal sewage treatment plant design using A2/O process. This process sewage treatment process for: from coarse grille to pump room, into the fine grille, heavy sand pool, first pond, A2/O reaction pool, the second pond, rapid sand filter , sterilizatio

    9、n tank, pasteurized metering tank , effluent discharge. The sludge treatment process is: from the second pond exclusion and the pond excess sludge pump room, first to get into sludge ascension into sludge concentration pool, pool, the sludge digestion mud storage pool, sludge dewatering, mud cake si

    10、notrans between. Through this technics, water will reach the urban sewage treatment plants standards for pollutants discharge (GB18918-2002) level A standard. Grille gate groove width 2.2m , over the gate head loss 0.1m, the total height of 1.15m, the total length of 3.55m;sewage pumping station wit

    11、h self-filling semi-underground rectangular pumping station, the choice of 300QW-950-24-110 submersible sewage pump, the flow rate of 950 m3/h, head to 24m, speed of 900 r/min,motor power of 110kW , efficiency 81.9%;fine grid gate groove width 1.69m , over- gate head loss of 0.13 m and a total heigh

    12、t of 1.18m , the total length of 2.5m;grit chamber advection of a length of 22.5m , the total 3 m wide , effective depth of 1.02m ,silt area height of 1.68m , the grit chamber 3m high , water is becoming wide part of the length of 2.75m , the water gradually narrow part of the length of 2.75m , inle

    13、t diameter DN900mm , water drop water using a thin-walled weir , weir head of 0.27m; primary settling tank and secondary sedimentation tank with radial flow sedimentation tank , each with two sedimentation tanks to 33m in diameter , the precipitation water depth of 3m , sedimentation tanks total hei

    14、ght of 7.735m ; A2/O pool set 4 , the effective depth of 3m , the pool length 30m , disgust, the anoxic tank width 2.7m , the aerobic tank corridor type PFR pool , 3m wide corridor .Sludge thickener with a rectangular flotation concentrate pool , size 618m , with a total height to 1.7m ; sludge stor

    15、age tank design an effective depth of 3m, the sludge hopper height 4.6m, total height 7.9m ; sludge digester design a digestion and secondary digestion , a digester 3 , and two digester 2 ; DY belt filter press sludge dewatering bandwidth 2m , prepared with 1 .Ordinary rapid filter 8 , the two-row arrangement , size 15 4m , the total 3.7m high ; disinfection contact tank 2 , 2 corridor plug-flow catalytic pool , effective water depth of 4m , IIIlength of 20m , width 8m, height 4.7m ; metering facilities for Pap metering tank 2, length of 12.465m , throat width 0


    注意事项

    本文(古交市排水工程设计.doc)为本站会员主动上传,图海文库仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对上载内容本身不做任何修改或编辑。 若此文所含内容侵犯了您的版权或隐私,请立即通知图海文库(点击联系客服),我们立即给予删除!




    关于我们 - 网站声明 - 网站地图 - 资源地图 - 友情链接 - 网站客服 - 联系我们

    网站客服QQ:2356858848

      客服联系电话:18503783681

    copyright@ 2008-2022 thwenku.com网站版权所有

    ICP备案:豫ICP备2022023751号-1